Description
Silicon rubber for mold making features description:
Silicon rubber for mold making is white or red flowing liquid with
general hardness of ****0A°after curing. Molding silicon rubber is
a kind elastic silicon rubber mold which features with resistance
to deformation, high-temperature, acid-alkali and expansion as well
as high reproduction times, good tensile strength, tear strength
and elongation.
Silicon rubber for mold making operations:
If the customer wants to make large products and large size molds,
the mold should be made of silicon rubber with high hardness. On
the contrary, if the mold with fine and precision patterns, it
should be made of silicon with low hardness. The amount of the
curing agent depends on the actual requirements of the customer. If
molds requiring fast drying and demold, more curing agent is
needed; contrarily, if molds requiring slower drying and demold,
less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a
special soft silicon mold or fine detailed and complex patterns
products are required, 5%**0% silicone oil can be added to soften
the mold for easy demould.)