Split pressurized solar water heater

Description

Split pressurized solar water heater, vacuum tube with heat pipe, separated system, more simple and easy to install. CE, CCC, ISO ***1:***0 Model NO. Sbt-zof*1 Vacuum Tube Heat D*7"L***0mm/D*8"L***0mm With straight copper heat pipe Inner Tank Material & Thickness Imported SUS**4 Stainless ; 2mm Bracket material & thickness Aluminium alloy; 1.8mm Outer tank Material & thickness Galvanized steel alloy; 0.4mm Heat insulation layer Material & thicknessl Imported polyurethane; *0mm Tube Hail Resistence ≤*5mm Cold resistance **5 Working temperature *9 celsius degree Stagnation temperature **0 Working pressure 1.0Mpa(*0bar) capacity **0, **0, **0, **0, **0L Seperated pressurized S. Working principle: 1ï&frac*4;‰ When the temperature of heat collector reaches the set value, the controller will make the circulation pump work automatically. 2ï&frac*4;‰ The circulation pump makes heat-conducting liquid circulate automatically. 3ï&frac*4;‰ The heat-conducting liquid transfers heat to water by the heat exchanger in the tank. 4ï&frac*4;‰ In case the teperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically. 5ï&frac*4;‰ In case the temperature of the tank does not reach maximum temperature, then start the auxiliary heating device. Structure: The seperated pressurized solar water heater is composed by heat controller, storage tank, controller, working station and installation parts.