Description

HI-TEMP/LOW VOLATILE Makes gaskets for high temperature applications Up to **0º F(**3º C); Safe for oxygen sensor equipped vehicles; Excellent heat control and torque retention for overhead cam and timing Chian covers. Dries tough. Flexible and improves high temperature. Resists most engine fluids. DIRECTIONS: 1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease. 2. Remove cap, puncture inner seal, screw on nozzle and cut to desired size. 3. Apply continuous, uniform 1/**0 to 1/*0bead around perimeter of one surface. Conpletely surround all bolt holes. 4. Wait *0 minutes for silicone to "skin over" Reassemble parts CAUTION: On contact uncured sealant causes irritation. Avoid contact with eyes and skin. IN CASE OF CONTACT, flush eyes with water. Call a physician. Remove from skin with a dry cloth or paper towel. Sealant releases acetic acid(vinegar-like odor)during curing. Use with adequate ventilation. Keep out of the reach of children. NOTE: Leave thickness for gasket whenre-assembling, Do not over-tighten bolts. Remove excess silicone with dry cloth or alcohol wipe. Silicone dries to touch in 1 hour Allow *4 hours to fully cure and bond. Replace cap after use. Suggested applications include: Valve covers. Oil pans. Intake manifold end seals. Timing covers. Transmission pans. Water pumps Available in: *5ml and *5ml tubes Available color: Black, grey, red, white, blue and clear or other customized colors;