Description

Features: *-Accuracy better than ± 1% F.S. *-Bottom, rear and panel installation available *-User can re-calibrated the gauge *-Four units selectable *-Dual-polarity value display (only available for range above **0psi) *-Relay output interface (NO / COM / NC) *-Separate and Window switch mode alternative Specifications: Display: 4 digits LCD display, size *6 x *5 mm Units selectable: Pressure gaugeï&frac*4;psi, bar, kg/cm2, kPa Vacuum gaugeï&frac*4;mbar, mmHg, inHg, kPa Proof pressure: **0% F.S. (vac ~ **0 psi) ; **0% F.S. (***0 ~ ***0 psi) Accuracy: ±0.3% F.S. &*;&*;*@******************** thermal error max. ±1% F.S. Measured media: Brass connection typeï&frac*4;extremely clean & non-corrosive gases only Diaphragm typeï&frac*4;All kinds of media according to diaphragm material Case: *7mm dia., plastic material Panel installation type —flange dia. *0mm, screw dia. 3.6mm Connection size: Brass connection typeï&frac*4;1/4”PT or NPT male thread, electroplate Diaphragm typeï&frac*4;standard 1/4”PT or NPT male thread, SS**4 ï&frac*4;œother size and material availableï&frac*4;ž Supply voltage: external DC *2V or DC *4V or AC **0V or AC **0V (option) Switch capacity: AC**0V, *0 Hz, 1A, max. contact impedance 0.1Ω, current consumption **0 mA max. Switch contact: When the contact close, LED on the plate will lighten Zero offset: Display can be zeroed when it is not zero offset due to temp. effect Temperature: Operation 0 ~ *5 oC / *2 ~ **5 oF ; Storage **0 ~ *5 oC / *5 ~ **5 oF