Description

Detailed Product Description 1.Description of RTV*2 molding silicone rubber for candle mold: HY***8 RTV*2 molding silicone rubber for candle is mainly used for toy gifts and craftwork gifts. HY***8 RTV*2 molding silicone rubber for candle mold has the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. HY***8 RTV*2 molding silicone rubber for candle mold is suitable for small products or fine and precision products which is difficult to demould. HY***8 RTV*2 molding silicone rubber for candle mold is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 0.2%. 2.Applications of HY***8 RTV*2 molding silicone rubber for candle mold: HY***8 RTV silicone rubber for candle mold is applicable for Poly technique, lightings, candles, and molds in multiple pieces for large products. ***** Description of HY***8 RTV*2 molding silicone rubber for candle mold: HY***8 RTV*2 molding silicone rubber for candle mold is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2%*3% at the room temperature, the silicone rubber is still operational within *0 minutes, and in **3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. ***** Instruction for HY***8 RTV*2 molding silicone rubber for candle mold: HY***8 RTV*2 molding silicone rubber for candle mold is white or red flowing liquid with general hardness of ****0A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.