Description

Jieke Wood Co, .Ltd specializes in the production of edge glued panels, finger joint panels, wooden worktops(solid wood worktops, table top, laminated worktops). We can offer many species, such as oak, beech, ash, iroko, wenge, walbut, zebrano, sapele, acacia, teak and bamboo and so ***** information please view ***** or email me on jkworktop at ***** Dimensions:*******0x**0/**0/**0/**0/***0x*8/*0/*0/*0mm Stave/lamella width: *0, *0mm, ****0mm speces:Oak, Wenge, Beech, Birch, Iroko, Zebrano, Elm, Ash, black Walnut, sapelli, ***** Quality:AB, AC, BC Grade A face: clear, small pin knots are allowed, no other defects, uniform colour. B face: sound knots are allewed max *0mm diameter, few sapwood is allowed but evenly distributed. General technology: Lamellae of different widths are not mixed within worktops. The width of one of the outside staves is between *0mm and *0mm. Length of stave is no less than **0mm, to be randomly distributed to give a balanced appearance. The length of staves on both ends may be less than **0mm. Cupping is deflection from the straight across the width. Tolerance is a maximum of 2mm over **0mm. Bowing is deflection from the straight along the length. Tolerance is 1mm per linear metre. Parallellness of two long edges, tolerance is +/- 1mm over a 4, **0mm length. Moisture content is *0% +/- 2%. Glue specification is D3 or D4 mark mydrin type CE **0. Finger Joints: Quality of joints between lamellae will totally exclude breakout, gaps, holes and excess glue on A face. Package: Each worktop will be individually shrink-wrapped and package strong pellat Orders for customer-made specification and packing are welcome. Please feel free to contact us for any inquiries and we will always be of service to you!