Description

Lithium balance charger/discharger (Model: B6 V8) V8 is the Newest in B6!! Specification Operating voltage DC *1~*8 volts Idling current approx. **0mA Charge/discharge power max. *0/5W NiCd/MH 1~*5 cells LiIo/LiPo/LiFe 1~6 series Pb 2~*0V Charge current 0.1 to 5.0A Discharg current 0.1 to 1.0A No. of cycle 1 to 5 times Battery data memory up to 5 data Weight **0g Dimension **7x*5.5x*0 mm User&#**9;s setting-up parameters Lithium battery voltage type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V NiCd Delta-peak voltage sensitivity 5 to *0mV NiMH Delta-peak voltage sensitivity 5 to *0mV Battery temperature cut-off *0 to *0C or OFF Waste time between charge/discharge 1 to *0 min. Trickle charge mode ON/OFF, up to **0mA Integral timer limit for safety *0 to **0 ***** OFF Maximum charging capacity limit for safety *0 to ***0mAh or OFF Key beep and buzzer sound ON/OFF Input power low alert *0 to *1V Welcome you orders! →Operating software Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning. →Individual voltage balancer for Lithium batteries B6 V8 has an individual cell voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing. →Accept various types of Lithium battery B6 V8 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer &#**9;Warnings and safety notes&#**9; section.