Description

Integrative Coiler Solar Water Heater Specificationï&frac*4;› 1. Material: 1) Water Tank and Bracket: a. Inner Water Tank: imported SUS**4 stainless steel b. Outer Water Tank: galvanized steel alloy or stainless steel c. Tank diameter: **0 / **0mm d. Bracket: Galvanized steel or aluminum alloy 2) Solar Vacuum Tube: a. Size: Φ*8mm/***0mm b. Quantity: *0 / *4 / *0pcs c. Tube Coating: Cu-S/S-AL/N d. Hail Resistance: Diameter *5mm 3) Temperature Insulation Layer: a. *0mm imported polyurethane, keep same temperature and high pressure foam b. Heat preservation: *2 hours 4) opper coil: ?*2mm /Thickness 0.8mm. 2. Capacity: **0 / **0 / **0 /**0liters 3. Max. pressure bearing: 0.6MPa 4. Cold resistance: **0 5. Absorber Area: 2.*4m2/3.*3m2/4.*3m2/5.*2 m2 6. ISO***1 / CE certificate/EN*****5 Integrative Coiler Solar Water Heater Working principle: A copper coiler with *2 meters length is installed in water storage tank as the heat exchanger. When water flows into the copper coiler, it absorbs the heat from the water in the tank, so it can bear much higher pressure, there will be a strong and more comfortable shower. And, without the tank directly transferring, the water is more clean and healthy.