HDF240 240 ton high speed plastic injection molding machine

Description

The high speed injection molding machine is designed for producing pp material disposable plastic containers thin wall containers. According to lots of our customers’ feedback from Australia , Zhe jiang province and Guang dong province, the machine has high speed , high efficiency , low defective rate and a good stability. When the machine is in a work condition, the injection speed can reach **0MM/S, and the cycle time is about from 2.2 second to 3 seconds.( refer to the catalogue). During the actual production process, the cycle time will be a little longer than this , according to the demould of the products from the mould. Currently the cycle time of the HDF **0 high speed injection molding machine is as follows: Two cavities per mould (for container’s cover) 4.6 seconds / mould One cavity per mould (for **0 ML square snack box) 3.4 seconds/mould One cavity per mould (for **0ML square snack box) 3.5seconds/mould One cavity per mould(for ***0ML Square snack box) 3.*5seconds/mould The **0ML box’s weight is *7.5 gram, the **0ML box’s weight is *8.5 gram, and the ***0ML box’s weight is *0 gram. The cycle time of the HDF **0 high speed injection molding machine is : Two cavities per mould (for **0ML square snack box) 4.8 seconds/ mould TWO cavity per mould (for **0 ML square snack box) 4.8seconds/mould The above plastic containers are all made of pp material , the wall thickness is 0.4 MM, and use air blowing for the product demould.