Sell Modern Supper Slim Hid Ballast

Description

Input Voltage Range DC*2Vï&frac*2;ž*4V Typical Operating Voltage DC*2.8V Typical Input Current 3.2A, Condition: DC *2.8V Input Max. Inrush Current *5A Output Power *3W±2W(Constant Power) Output voltage AC*5V±*5V (Square Pulse, RMS*0Vï&frac*2;ž**0V) Output Frequency **0Hzï&frac*2;ž**0Hz Efficiencyï&frac*4;š ≥*3%, Ignition pulse Typical peak Voltage *3kV Typical duration 1s Cooling method Natural cooling Input Protections Under voltage protection at 6V±1V Over voltage protection at *2V±1V Input connection-reverse protection Output Protections Short circuit protection between two outputs Open circuit protection between two outputs Operating temperature **0℃ï&frac*2;žï&frac*4;‹ *5℃ Storage temperature **0℃ï&frac*2;žï&frac*4;‹**5℃ Warning Notice Do not attempt to handle or operate an electronic power supply (EPS) and ignitor before completely reading and understanding this notice. Contact EPE if you are uncertain of characteristics of thesedevices. The ignitor produces starting voltages of up to *3kV and electromagnetic radiation interference, which are hazardous to personnel and sensitive instrumentation. Do not touch any conductive parts during operation. Both electronic lamp ballast and ingnitor must never be installed or operated in an explosive or volatile atmosphere. Never use the ballast or ignitor near flammable gases or liquids. See that there will be no moisture, dust or similar which could lead to short circuits or fire. No potential isolation is provided between line input and output. Accidentally grounding of an output terminal by direct contact or arcing to GND can damage the unit (no warranty replacement). All installation and repair work on this unit is only permitted by qualified personnel. Please provide sufficient cooling condition for EPS and ignitor. EPE does not assume liability for disregarding of this notice, incorrect use of the EPS and ignitor or disregarding of any legal requirements. This product is subject to technical changes without prior notice. We reserve the right to make technical changes without prior notice.