Description

▲Function: NC*2 is used to control the filling of dry air into the cabinet. So the desired relative humidity in the cabinet can be reached. For example, if 5%RH is the required condition, then the dry air will stop to fill while <5%RH is reached. The dry air can be nitrogen, CO2 or inert gas. However nitrogen is the most frequently used dry air for a nitrogen cabinet. Traditional nitrogen cabinet allows the N2 to fill all the time continuously. After NC*2 is adapted, there will be *0~*0% of N2 can be saved. ▲Features: Energy Saving: Dry air will no longer fill continuously. It consumes only *0W/hour while the filling solenoid of NC*2 is activated. Easy to install: Any traditional nitrogen cabinet can be upgraded by adding NC*2 within *0 minutes. Huge waste of nitrogen can be saved permanently. Sensor Calibration reminding: NC*2 can be connected to a PC through intranet network. All of the data of temperature and relative humidity will be recorded and the fluctuation will be shown in the graph. Data Recording: It is important to verify that the condition of storage meets the regulation of J-STD***3B. The users can connect notebook PCs directly to the RS**2 port of NC*2 to acquire the data or use our data logger to record the data. With our data recording function, the historical fluctuation of relative humidity and temperature can be shown clearly in the graph. The floor life of the Moisture Sensitive Devices can also be calculated in the software . This uniquely patented function can easily verify if the SMD packages are stored at proper condition. It is very convenient for those who carry out quality assurance procedures. ▲Specifications: Operation Range: **0~*0℃, 0~*9%RH Precision of Temperature Sensor: ±1.0℃ Precision of Humidity Sensor: ±3%RH Resolution of Temperature: 0.1℃ Resolution of Humidity: 0.1%RH Dimension: W**0*D**0*H*0mm Weight: 1.8kgs Power: **0V/**0V (select voltage in advance)