for
backhoe - loaders, loaders, farm tractors (above
*0HP) A snow
plough can be used with backhoes, loaders or tractors (above *0HP).
It can be assambled by pivots or mechanic or hydraulic quick
couplings. It is dedicated to snow removal from the roads, squares,
etc. Setting a snow plough out of axis (right or left) 0° **0° is
made by two hydraulic servo-motors. A rubber blade allows to run
works on the rough grounds.
Snow
plough’s technical specification: -
width of the snow removal ***0/***0mm -
possibility of the angle setting of the snow plough
0°**0° -
equipped in a rubber blade -
weight **0/**0kg
for
farm tractors (up to *0 HP), fork-lift trucks A snow
plough can be used with tractors or fork-lift trucks. It is
assambled to a tractor by three points suspension system through
terminal plate. It is dedicated to snow removal from the pavements,
roads and squares with asphalt pavement, concrete pavement or
pitchers. A snow plough lifting up is made by three points
suspension system. Setting of a snow plough out of axis (right or
left) 0° **0° is made by a hydraulic servo-motor. After removing a
rubber cover from mouldboard a snow plough can be used as a ground
eqaulization machine.
Snow
plough’s technical specification: -
width of the snow removal ***0/***0mm -
possibility of the angle setting of the snow plough
0°**0° -
equipped in a rubber blade -
weight **0/**0 kg
