Description

Plastic random packing Brief Introduction Plastic tower packing is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from *0to **0. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc. Physical & chemical properties of plastic random packing Performance / Material PE PP RPP PVC CPVC PVDF Density (g/cm3) 0.***0.*6 0.***0.*1 0.***0.*4 1.***1.*4 1.***1.*4 1.***1.*8 Operation Temp. () *0 >**0 >**0 >*0 >*0 >**0 Chemical corrosion resistance Good Good Good Good Good Good Compression Strength(Mpa) >6.0 >6.5 >7.0 >6.0 >8.0 >*0.0 Pall ring Technical data Spec. D*H*T (mm) Number per m³ Bulk density (kg/m³) Surface area (m²/m³) Free volume (%) F factor (m*1) Dg*6 *6**6*1.1 *****0 **1 **8 *1 **9 Dg*5 *5**5*1.2 ****0 **0 **5 *0 **9 Dg*8 *8**8*1.4 ****0 *8.0 **5 *9 **0 Dg*0 *0**0*1.5 ***0 *4.8 **2 *0 **4 Dg*6 *6**6*2.6 ***0 *0.9 *3 *2 *4 Note: The above data are reference to material PP. Rosette ring Technical data Spec. D*H*T(mm) Number per m³ Bulk density (Kg/m³) Surface area (m²/m³) Free volume (%) Dg***-ring *5*9*1.5*2 *****0 *0 **5 *2 Dg***-ring *7**9*3*3 ****0 **1 **5 *8 Dg***-ring *1**9*3*3 ****0 **3 **0 *8 Dg****-ring *9**9*3*3 ****0