Description

Sell Inert Alumina Ceramic Ball Brief introduction Inert aluminum oxide ceramic balls are widely used in many fields, including petroleum, chemical engineering, fertilizer production, natural gas and environmental protection. They are used as covering and supporting materials of catalysts in reaction vessels and as packing in towers. They have stable chemical features and a low rate of water absorption, resist high temperatures and high pressure, and also resist the corrosion of acid, alkali and some other organic solvents. They can stand the change in temperature during the manufacturing process. The main role of inert ceramic balls is to increase the distribution spots of gas or liquid, and to support and protect the activating catalyst with low strength. Dimension of inch and mm table Size inch Size mm Size inch Size mm 1/*6 1.**8 **1/*6 *6.**8 1/8 3.**5 **1/8 *8.**5 3/*6 4.**3 **3/*6 *0.**3 1/4 6.*5 **1/4 *1.**0 5/*6 7.**8 **5/*6 *3.**8 3/8 9.**5 **3/8 *4.**5 1/2 *2.7 **1/2 *8.1 5/8 *5.**5 **5/8 *1.**5 *1/*6 *7.**3 ***1/*6 *2.**3 3/4 *9.*5 **3/4 *4.*5 7/8 *2.**5 **7/8 *7.**5 *5/*6 *3.**2 ***5/*6 *9.**2 1 *5.4 2 *0.8 Typical Quality Assurance for Ceramic Ball To analyze the raw material for chemical composition, particle size and moisture content to ensure consistent properties that will provide optimum performance of the finished product. Following crumbling and pulverisation of the raw material it is screened to remove coarser particles. After the ground raw material is pre-selected by magnetic separation it is checked to make sure that the Fe2O3 content is less than 1%. After aging and soaking, the water content is checked to ensure it is between ****4%. After moulding shapes the product, extruding or hand rolling, a random check is made on dimensions and shapes. After the product is dried, a random check to make sure that the moisture content is less than 3%. During firing the furnace is precisely controlled with regard to temperature and duration of firing. Every finished item is visually examined to confirm shape, color and dimensions are within specification. Random tests are carried out to confirm acceptable chemical and physical properties of the finished product. This includes testing for specific gravity, compressibility strength, water absorption, anti-acid strength, etc. Prior to packing the finished product for despatch the weight of a unit volume is checked to comply with the specification limits. Finally, the finished product is certified to comply with the Customers specification. if you are interested so please feel free and send inquiry to us for more details.