VOLVO diagnostic system, VCT2000

Description

VCT***0 is the latest original factory equipment of VOLVO Company. It included disassemble and assemble circuit diagram, parts, system working principle for all type of VOLVO. And it also could inspect, malfunction channel off for all OBD-II cars which were made after ***8. It&#**9;s the necessary equipment for servicing VOLVO. VCT***0 can do diagnostic fault tracing, reset service reminder indicator, change customer parameters etc in Volvo vehicles from M/Y ***9 and up to Volvo V*0 !!!! The VCT***0 (Vehicle Communication Tool ***0) is a communication device between the vehicle and the VADIS Cart or Tough Book. It is used for downloading software from VADIS to the vehicle, reading off DTCs and to perform other diagnostics for various electronic control modules. The VCT***0 for diagnostics and reading off DTCs can only be used on cars year model *9 and newer which means that the VCT***0 replaces the Volvo System Tester communication tool on **- vehicles. Compatible Vehicles: ALL VOLVO&#**9;S ***9 ***0 ***1 ***2 ***3 ***4 ***5 ***6 ***7 ***8 VCT***0 firmware is software specifically designed for the VCT***0 (Volvo Communications Tool). Periodically, new VCT***0 firmware updates will be made available to you. This firmware update is available at no additional cost as long as you maintain an active VDA (Volvo Diagnostic Application) subscription. To update the VCT***0, you will need: 1: A VCT***0 connected to the computer and the 6 M cable. 2: Power supply for the VCT***0. You can supply power to the VCT***0 by connecting the 6M cable to the VCT***0 and to the OBD2 connector in any ***2 to current Volvo. NOTE! Always connect the PC to the VCT***0 and the VCT***0 to the 6M cable before connecting it to the car!