Sell digital ultrasonic flowmeter

Description

The flowmeter measures the flow of fluids flowing through a closed round pipe based on “velocity-difference” principle. It consists of 2 parts, ***** conversion unit and clampedon transducer. Thanks to the use of advanced multi-pulse, digital signal processing (DSP) and errorcorrection technologies, the meter is highly adaptable to industrial working conditions. Meter transducers are fixed on pipe by means of Huizhong company’s special clamping device. For their mounting, shutdown of meter flow is not required. Fluid measured: Water, sewage and other homogeneous fluids in full pipe flow Accuracy, %:±1.5 Flow velocity adaptable, m/s:±0.**-±*2. Pipe size adaptable, mm DN*0ï&frac*2;žDN***0 Transducer material:1Cr*8Ni9Ti (Stainless steel) Maximum pressure-bearing capacity of transducer Pipe inside pressure not considered Immersion depth of transducer:<3 m Working Environment: Conversion unit Temperature: **0℃~**5℃ Humidity: ≤*5% (RH) (For use under otherwise specific conditions, please specify on ordering). Transducer Normal temperature type: 4~*0℃ Cable:**0℃ - **0℃. Output of conversion unit Analog signal:Optical-isolated: 4~*0mA/0~*0mA/0~*0mA (Selectable via keyboard), Load capacity: <**0Ω Switching signal:Cumulative flow electronic switching output Closing time: 3 ms Cycle: 6 ms Transmission distance: ≤**0 m. Serial port:RS***5 Transmission rate: ***0 bit/s Transmission distance: ≤***0 m Printer :RS***5 is needed for its working Thermal sensitive mini-printer (Optional) Keyboard:1X3 pushbuttons Display Mode:2X*6 digit back-lit liquid crystal character display Data display: Simultaneous display of: Instantaneous flowrate: *****9.*9~*****9.*9 m3/h Cumulative flowrate: ********9.*9~********9.*9 m3Key display of cumulative: running time Data storage Cumulative flowrate, cumulative running time and various set parameters (Data can be saved for **0 years after power fail) Power supply:AC**0V±*5%, *0Hz Power<*0W (DC5~*6V,