Description

Features: Battery charge management, state of charge information. Built-in Battery Energy Monitor tracks Power production and consumption to calculate the energy remaining in battery state of charge (SOC) is displayed in percent full, Amp-hours, Watt-hours, and *0days of energy-harvest history is stored in the solar charger. Continuous output Power Rating without de-rating at up to *0°C ambient temperature. Supports Flooded Lead Acid (FLA), GEL, and Absorbed Glass Matt(AGM) batteries, 2/3/4 Stage charging with adjustable set point. Wire the PV modules in series up to **2VDC normal (**0VDC Max). Built-in temperature compensation function for safe and complete charging. Description: Optimal Solar Maximum Power Point Tracking Wind & Solar Charge Controller Can be paralleled (Max. *6 sets) at will, according to your demand. Specifications: Model No. PM-SCC**0AMW Maximum output current (Continuous at up *0°C ambient temperature) *0 Amps Battery Voltages *2, *4, *6, *8 VDC Normal Max PV Input Current *0 Amps Input Voltage Range *6~**2VDC Operating **0VDC Maximum Open Circuit Voltage Max PV Array Power ***0 Watts (Maximum when equalizing a *8V battery to *4V at *0 Amps) Charge Regulation Modes Bulk, Absorption, Float, Auto/ Manual Equalization Battery Temperature Compensation 5.0 mV per degree C, per 2 volt cell DC to DC Conversion Capability *2V Battery: *6~**2VDC *4V Battery: *2~**2VDC *6V Battery: *8~**2VDC *8V Battery: *4~**2VDC Display Status Built-in *-line, **-character LCD with backlight LCD status screen displays input voltage and current, output voltage and current, charge-mode, Battery SOC Data Logging Logs energy harvested for *0 days, LCD displays WH, KWH, AH Energy Monitor LCD shows SOC, AH, WH, and present charge or discharge current. A *0mV/ **0Amp shunt is required to use Auxiliary Relays Two independent relays with from A (SPST) contacts for control of external devices. Contact rating is 3 Amps, *0VDC Operation Temperatur