Description

CGM*1P Description CGM*1P is the industry leading cement-based, nonmetallic, nonshrink grout for supporting machinery and ***** is formulated with air release technology that combines high performance with the greatest reliability. CGM*1P meets the performance requirements of specifications for nonshrink grout over a wide temperature range, 4 degree C and *2 degree C, and a long working time, *5 minutes. Uses Installation of machinery and equipment Reinforcement and repairing of building structure Installation grout of foundation bolts Make the floor level No shrink grouting of later layer Substitute for epoxy resin Bridge, road and tunnel projects anti-leakage, anti-crack, waterproof concrete project Grouting of machinery and equipment to maintain precision alignment Nonshrink grouting of structural steel and precast concrete Grouting of anchors and dowels Support of tanks and vessels Advantages Strength could reach up to *0MPa 1 day after grouting No strength decline during the long term use leveling ensure all gaps could be grouted Non-shrinkage foundation ensure machines steadily running Suitable for oil muddy environment Tightly adhere to old concrete Provides placement versatility: pour, pump or dry pack Placement Guidelines SURFACE PREPARATION: Concrete must be clean, sound and roughened to ensure a good bond. Soak concrete surface for 8 to *4 hours prior to application with liberal quantities of potable water, leaving the concrete saturated and free of standing water. MIXING: Mix CGM*1P thoroughly for approximately four to five minutes to a uniform consistency with a mortar mixer. A drill and paddle mixer is acceptable for single bag mixes. For optimum performance, maintain grout at ambient temperatures between 4 degree C and *2 degree C. Use heated or chilled water to help adjust working time. Mix CGM*1P with 7 - *1 quarts potable water per **0 lb. bag (3 1/2 to 5 1/2 quarts per *0 lb. bag). Do n