Sell 10/100/1000M Gigabit Ethernet Fiber Media Converter

Description

The Media Converter complies with IEEE**2.3z, IEEE**2.3AB Standards It is designed to convert data signal between *0/**0/***0 Base-T and ***0Base-SX/LX/ZX Gigabit Ethernet.

It supports *0/**0/***0Base-T and

***0Base-SX/LX/ZX applications. The data

signal converted by such high performance media converter can be transmitted up to **0Km maximum by fiber-optical cable.

The Converter is equipped with two fiber optic

connectors (One for transmitting-TX and another

for receiving-RX) and one RJ**5 Jacks and one external power supply receptacle. Six LED indicators are built-in for easy diagnosing and monitoring the status of power, Unshielded Twisted Paired (UTP) Link, UTP Activity, Fiber Link, Fiber Activity, Full duplex and data rates. It can be configured automatically for Full Duplex or Half Duplex operation.

It is compact, cost-effective, low dissipative, high reliable and stable. It can be used in standalone applications, or 2U Rack-Mounted applications where multiple media converter can be inserted into a rack-mount chassis (Up *6 units), and allowing all the converters to be powered by a single internal power supply. The FMC-GEC**-xxMxx products can be locally managed on plexda NMS management system when working In chassis with SNMP agent.

1). Support the IEEE**2.3 fast Ethernet standard (*0Mbps)

2). Support the IEEE**2.3u Fast Ethernet standard(**0Mbps)

3). Support the IEEE**2.3ab,IEEE**2.3z Gigabit Ethernet standard (***0Mbps)

4). Support the IEEE**2.3x full-duplexes flow control 

5). Support the IEEE**2.1d spanning tree protocol

6). Support the IEEE**2.1Q VLAN remark protocol

7). Full-duplexes, half-duplex auto negotiation

8). *0M/**0M/***0M bit rate auto negotiation

9）Ext. Power or Int. Power for option, AC and DC input for option, default is built in *5~**5VAC input power, OVP, OCP and short protection functional.

*0). Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and *-way associative hash algorithm.

*1). Half duplex: back pressure flow control 

Full duplex: IEEE**2.3x flow control

*2). Automatic identification of MDI/MDI-X cross line.

*3). Max.***6bytes packet at store-and-forward mode, Max.9K bytes packet at cut-through mode

*4). low power consumption, low heat, standalone type with *0W special communication power supply

*5). Support LFP function.

*6). In conformity to safety code of FCC, CE certification.