Description

Model:***5 Performance: Up to performance and security standard stipulated by NSC and FIG, Pressed in middle position with ***0N force, its deflection is *0±*0mm, deforming doesn’t exceed 1mm after removing pressing force. Specification:1、The horizontal bar is consist of base disc, stand pillars, bar and steel cable fixed structure, it is dismountable, expedient in both delivery and packing. 2、Bar is made of Φ*8mm high quality stainless spring steel, adjusting bar is Φ*2xt3mm welded bright tube, stand pillar is Φ*1x4 seamless tube. There are adjusting holes on adjusting bar, bar height can be adjusted by adjusting pin. 3、There is a steel cable connector in each outward side of each stand pillar, which is used for drag hook connected with steel cable. Stand pillars fixed by turnbuckle will not be movable. 4、******0cm。 There is micro-adjuster in the connection between base disc and adjusting bar, which is used for lifting bar into a certain height. And height scope is **0~**0cm. Material: 1、Outer tube is undergone anti-static plastic coating treatment, lifting tube is coated with zinc plating. Fittings is coated with Ni-P plating This product is good in durability and stainlessness. 2、Bar is made of high quality spring steel. 3、Steel cable is covered with plastic material and tensile strength is not below ***0N. Modelï&frac*4;š***6 Specification: Bar sectional diameter is *8mm, height is adjustable between 1.5m and 2.6m. The lowest adjusting grade is 0.8m grade. Conforms to international standard. This product is expediently mounted and dismounted, made of high grade material, safe and reliable. Pressed in middle position with ***0N force, its deflection is *0±*0mm, deforming doesn’t exceed 1mm after removing pressing force. A specially designed elastic fitting is helpful for 1~2 man to quickly replace bar and adjust height. It can be used as uneven bar by replacement. Materialï&frac*4;š 1、Lifting steel sleeve holder and electroplating outer t