Angular Contact Ball Bearing

Description

Angular contact ball bearing’s limit rotational speed is quite high. This kind of bearing is able to support axial load, or both radial & axial load *****’s axial load depends on the contact load, and increases with the increase of contact angle.Angular contact ball bearing can be divided into three big categories: Single row angular contact ball bearing, including both inseparable and separable patterns. Pattern S****0 is the basic pattern of separable angular contact bearing, and pattern SN***0 is with separable inner *****’s outer ring and inner ring can be installed separately, so it can be applied to irregular installation environment. Its contact angle is **0. The inseparable angular contact ball bearing’s inner ring and outer ring can not be fixed separately, Contact angle is classified as ***0C(*5°), ***0AC(*5°) and ***0B(*0°). Double row angular contact ball bearing, is a kind of inseparatable bearing. This type of bearing can simultaneously supprot both radial loads and a relative great axial ***** load is also ***** axial displacement of axe and housing in double directions can be limited. In comparison with single row angular contact ball bearing, it has sufficient ***** contact angle is *0°. Four-point contact ball bearing is a kind of separatable bearing. Patten QJ***0 has two-piece inner ring with *5° contact angle, pattern QJF***0 has two-piece outer ring with *5° contact angle.Under no-load or radial load only, the steel ball and the ring are *-point contact;and under axial load only, the steel ball and the ring are *-point contact, able to support axial load in double directions. Four-point contact ball bearing can also support moment load, so it has the function of both single row and double rows ***** can work only when 2 points contact. Our angular contact ball bearings mainly use machined solid cage.*-point-contact ball uses brazen or aluminum solid cage.