Description

Application: A broad usage in the low voltage insulation lines, leading the branch connection from the main conductor; T-connection of low voltage insulation wire service and cable branch connection for the building distribution system. Features: The clamps with specially designed contact teeth, are suitable for the connection of aluminum and copper. Outside insulation shield is adopted glass fibre reinforce high polymer material. It is unnecessary to remove the insulation layer of the connector when using. Put the main conductor and branch conductor parallel into the teeth groove of the clamp, tighten the bolt, and then pierce the insulation of two conductors at the same time to make the conductors connect. The insulation conductor is covered with the insulation shield and sealed, then the functions as waterproof and sealing perfectly. Performance: Mechanical performance: At the breaking force of the conductor, the clamp should not be broken. Rising temperature performance: At the rated current and short circuit, the surface rising temperature of the clamp should be less than the connecting conductor. There is no breakdown when is under water *0cm, and 6kv, lasting 1min.