Sell steel bar straightening-cutting machine

Description

The product feather of GTA series: SC5/*2 high-end steel straightening and cutting machine, particularly suitable for ***2millimeter hot-rolled plate PRC HRB**5, HRB**0 straightening cut, scratch a small, fast, high-end similar products at home. The main mechanical properties are as follows: 1. Straightening principle: The machine is up and down two rows of continuous roller straightening method, longitudinal ribs on the reinforcement of basic no-op, each straightening gun to produce steel plate for more than ***0 tons (and other manufacturers to adopt the rotation mode of correction direct method, operating on the longitudinal ribs serious and straightening block wear quickly lead to the production costs.) 2. Shear principle: This machine adopts frequency conversion flying shear, cut an instant, reinforcement of feeding did not stop, so mechanical components with the reinforcing steel and the friction is small, and further ensure that steel surface quality. 3. Electric control parts: frequency control, simple operation and convenient. GTA series of technical parameters: The steel diameter is ***2mm, hot-rolled plate HRB**5, HRB**0, HRB**0/ ***2mm plate circle and cold-rolled plate. Rectifies speed is ****0m/min, frequency conversion velocity modulation. Range of the end product is *********0mm, can be adjusted according to user’s requirements. Straightening accuracy is ≦3mm/m.Length accuracy is ± 5mm. The rated power is *0KVA, **0V**0HZ. Equipment gross weight 3ton. Actual output is ****5 tons/times. Puts the coil is horizontal setting out. Off frame in horizontal lineation frame bell-shaped. Manages the line frame is trumpet-shaped object shape. The rectifies structure is two rows of high and low rectifies round continual roller type rectifies, does not damage basically to the longitudinal rib, the main body for the entire tooth structure, the bath lubrication The cut off structure is use very fast shear and frequency conversion to cut off.