Description

The steel silo series is special designed by our senior engineer, with high-quality galvanizing board the life cycle of the products can come up to ****0years. Our products are completely comply with the national standard of GB*********1 The Grain Code of Steel Silo Design and have reached the advanced national levels in performance. We can produce various kinds of steel silos of plate-bottom or conical-bottom(all are available to the customers demandings and drawings), the diameter ranging from1.8 to *2 meter and the capacities from 5 to ****0 tons per storage bin. Meanwhile, we can also produce the supplementary equipments such as bucket elevator, scraper conveyor, belt conveyor and so on. Our bolted steel silo is used to store grain, seed, feed, cement, coal and other granular or powdered materials. Popular uses for our product include, Temporary Transit, Raw Material, and Grain warehouses. Current applications of the Bolted Steel Silo is to provide efficient and affordable storage solutions for grain warehousing, alcohol plant, flourmill, oil mill, starch factory, feed mill, malt factory, distilleries, seaport, farm, and grain-processing centers, etc. Some advantages of our product: 1. Lower basic cost with lightweight, low request for foundation, low consumption of steel. 2. High degree of standardization. We can produce the standard components which can be installed on-the-spot. 3. Simple, easy and efficient to install within a short amount of time due to superior component design which are connected by standard bolts. 4. Easy to understand . The bolted silo is equipped with relevant accessories, such as: conveyor, ventilation, drying and monitoring devices, etc. to ensure the quality and safety of the material stored in the silo. 5. Easy to maintain. As the parts of the silo are connected by standard bolts, so it is easy to remove or repair it. 6. Low cost and long tenure of use. The cost of bolted silo is just *5%**0% of the cement silo with the same specification; and its life span can reach *0 years. Structural Outline The structure consists of two parts : The body and the roof. Includes the wall plate, column, manhole, roof ladders and so on. (1) The wall plate Our steel is hot galvanized, which makes it durable and weather resistant. Our advanced bolts with spherical washer and the resisting-worn rubber are used to ensure the tightness and using period. (2) Column The column, made by the Z-bar, is used to reinforce the silo body. It is connected by junction panels. (3) Manhole and Roof Ladders There are inspection door and ladders inside and outside the silo body. It is convenient and accessible for any maintenance work. Roof is made up of radiated beam, roof cover board, tension ring, ventilator scoop, roof cap, etc. The space age construction technology, which is adopted in the design of the silo framework, can ensure the stability of silo under the large span. There is a guardrail around the silo eaves and there is also a manhole on top of the roof. The main accassaries TDTG series Bucket Elevator is the fixed continuous vertical transportation equipment and belongs to centrifugal unloading type. It is applied to transport grain, beans and other granular materials which are non-corrosive & with a temperature below *0 temperature. Compared with other devices, Bucket Elevator is really an efficient transmission device, with smaller size, better appearance, high capacity, better seal, and self-reliant. MS series Drag Conveyor is continuous horizontal transportation equipment. It is applied to transport powder, small particles and other bulk materials. With small size, high efficiency, low noise, sealing, and install & maintain easily, MS series Drag Conveyor can highly improve labor intensity and prevent environment pollution. So it is widely used in oil, feed, chemicals, port and other industries.