Description

Epoxy polyester powder coating Introduction This series of product are mainly made of polyester resin and epoxy resin. It has merits of two types of powder coating. It featured of excellent leveling property, high decorative, good mechanical and corrosion resistance property. It widely applies to paint of indoor metalwork. Series 1. Standard curing and lower temperature curing is available. 2. Made to various of gloss and color: high gloss (Above *6º), flat gloss (*0ï&frac*2;ž*5º), semi gloss ï&frac*4;ˆ*0ï&frac*2;ž*9ºï&frac*4;‰and no gloss (below *0º), gloss and color of product is made according to clients requirement. 3. Various kinds of art texture products are available, such as sandy, wrinkle, hammer tone, lanose grain, metal effect, etc. 4. Special standard of product is available according to clients’ requirement, *****: RoHS Standard, ASTM**3 Standard, etc. Application This type of product is designed for surface coating of domestic appliance, metal furniture, instrument, indoor fitness equipment and radiator, etc. Physical Property Proportion: 1.**1.8 (varies with different color and gloss) Density distribution: average particle size is *0~*8um, adjusted as clients required. Performance of Coating Film Testing Items Standards and Methods Result Impact strength test GB/T********3 *0 Adhesionï&frac*4;ˆcross-cutï&frac*4;‰ GB/T********8 Class 0 Bend test GB/T********6 2mm Pencil hardness GB/T********6 1H*2H Salt spray test GB/T********1 >**0 hours Humid heat test GB/T********9 >***0 hours, gloss slight loss Notation: 1. All above tests are using 0.*5mm cold rolling sheet. The thickness of film is ****0um. 2. Performance of film may slightly decrease with decreasing in gloss. Package 　　 Carton packing with liner of double polyethylene bags. *0 Kg net weight each. Storage The product must be stored in ventilated, dry and clean room with temperature below *0 degrees celsius, no close to fire and other heating source, avoid direct sunlight, outdoor stacking is prohibited. The period of validity is *2 months under above conditions; expired products can not be used unless re-testing meets the utilization standards.