Description
Manufacturer,Supplier & Seller of Flexible Ball Style
Hone series:
Flexible honing tool,Flexible honing brush,Flexible
hone;
Flexible ball-style hones,Flexible ball-style honing tool
brushes;
(Engine,Brake) cylinder honing brush,Ball-style cylinder
hones;
Flexible cylinder honing tools,Cylinder flex hones;
Flexible ball type hone brush,Brush series ball,Bore honing
tools;
A/O,S/C & diamond honing stones,Cross-hole deburring
tool;
Standard-duty & heavy-duty silicon carbide flexible
hone;
Flexible ball style hone for surface deburring & finishing
of cylinder bores,oil and gas pipe,nuclear water pipe,metal
(stainless steel,iron,aluminium) tubing, Forcing cone hones.
Flexible honing tools for rotors,Flexible honing brushes for
rotors.
The Flexihone Tool is a resilient, flexible honing brush used
to improve the internal surface finish of a bore or cylinder.A
compliant honing tool for brushing cylindrical surfaces.
Typical Applications Include:
（1）Air Compressors Bores (2) Compressed Air Tool Bodies
(3) Hydraulic Ram Cylinders (4) Brake Cylinders (Wheel)
(5) Hydraulic Valve Bodies & Valve Guides (6)
Clutch and Brake Master Cylinders (7) Hydraulic Motor Bodies
(8) Finishing of Stainless Steel Tubing (9) Pneumatic
Cylinders (*0) Brake Rotors (*1) Surface finishing of
Boiler Components (*2)Engine Cylinders Bores and Block
Liners.
Application specially size for Firearms/Revolvers (Pistols
,Handgun Cylinder) / Rifles’ Chamber / Shotgun Barrels/Painball
Guns.Standard-duty Silicon Carbide flexible hones use on valve
bodies,valve guides,lifter bores,brake cylinders,small
engines,tubing and pneumatic cylinders.
Apwell has engineered and manufactured these Flexible Honing
Tools to be competitive with similar products in the market.
Apwell\'s products consistently create an ideal edge break, which
is smooth and free of deformed metal. The Flexible Honing Tools are
ideal in both automatic and off hand
applications.
Flexible Honing Tools have round, abrasive beads fastened to
the ends of flexible filaments. This self centering tool will
conform to the bore surface providing a consistent, even surface
finish over the life of the tool. The Flexible Honing Tool will
even provide an "edge break" not possible with conventional honing
stones.
Key
Features:
1. Sturdy, self-centering
stem.
2. Flexible filaments are engineered to provide the correct
pressure to create an ideal hone - bore after
bore.
3. Rigid abrasive media is firmly attached to the end of the
flexible filaments making the tool excellent for tough cross-hole
deburring and edge radiusing
applications.
4. Fill Material:Silicon Carbide or Aluminum Oxide,different
grit choice，such as
*0,**0,**0,**0,**0,**0,**0,***0…
Product Size:
1. Brush diameters ranging from 5mm to **0mm,Round
brush(PW**6) diameter is *4mm & *6mm.
2. Brush length ranging from *0mm to **0mm.
3. Stem diameters ranging from 1.8mm to *0mm.
4. Overall length ranging from **0mm to **0mm.
Great On:
1. Engine bores
2. Pneumatic and hydraulic bores
3. Valve and pump housings
4. Pipes
5. Connecting rods
6. Cam bores
7. Crank bores
8. Valve bores
9. Hydraulic cylinders
*0. Stainless steel tubing
Applications:
1. Honing
2. Creating cross hatched surface pattern for oil
retention
3. Cylinder port area deburring
4. Eliminating inside flashing
Instructions:
1. Choose the Flexible Honing Tool for your specific hole
size. The actual Flexible Honing Tool will be approx *0% larger
than the hole size.
2. Use ****0 weight oil for honing lubrication, when honing
hydraulic brake cylinders, use hydraulic brake fluid as a honing
lubricant.
3. Have the Flexible Honing Tool rotating upon entry and
removal from the bore.
4. Recommended RPM range for the Flexible Honing Tool is *0 to
**0 RPM, based on the brush diameter. Air Tools are not
recommended.
5. Use ****0 strokes per minute depending on the RPM. Final
stroking may be accelerated to develop a *5 degree cross-hatch
angle.
6. Honing time should be approximately *0/*5 seconds per
bore.
7. Do not use solvents for honing or
cleaning.
8. Clean cylinders after honing with warm or hot water and
detergent using an plain nylon brush, and then lightly oil the
bore.
