Description

Outlined: When filling, there are some residual liquid and oil stains adhering to the surface of tins, this machine can clear them effectively, efficiently and powerfully. Through the stainless steel chain transmission device which butted to this machine, transmit the packed cans to the lye spray area to be washed by high-pressure lye. First , the lye sprays in eight directions powerfully after being heated by the heated device. After that, the lye is recycled to a storage tank through a water catcher and recycling pipe, then to be reused after filtered; after washed by the lye, the tins get into the clear water spray area. The clear water sprays in eight directions powerfully after being heated by the heated device, in order to wash the tins with high-pressure. The tins will be transmitted to next production process automatically after washed. Devices as follows: ***** divide two spray areas according to technological requirements; ***** spray lye in the prior area; ***** spray clear water in the after area; ***** are two PH-resisting and stainless steel pumps in each area; ***** chains are PH-resisting and flat top roller chains; ***** chain wheel, driving shaft and following shaft are all stainless steel; ***** deploy special axletree of PH-resisting and without lubrication; ***** are stainless steel spray pipes and concentrated spouts in the machine; ***** deploy stainless steel cycle box of lye and clear water, as well as stainless filtering net; ***** deploy water catcher on the bottom of machine to collect dross easily; 1***** set the stainless steel water pump outside independently; 1***** deploy stainless steel valves for the dewatering; *3.Adjustable and horizontal plastic tail; ***** deploy conversion and deceleration electric box without degrees, SCHNEIDER button and contactor; *5.Power supply: **0V X *0HZ X 3 control supply: **0V X *0HZ X 2; *6.Size of machine: length 6m X, width 1.3mX, height 1.5m.