infant incubator BB-300

Description

Standard configuration the transparent bigger hood, control system, infant bed, water trough, skin temperature sensor, I.V.pole, mattress, height adjustable ;drawer, castors Optional parts: Phototherapy up side unit; phototherapy from up and down sides; RS**2(**5) connector; Tray/pole Function features ***** based servo controlled temperature system 2.Air temperature, skin temperature, humidity, timer and heat power separately displayed by LED 3.Alarms functions : Power failure; over temperature; temperature deviation; temperature sensor failure;fan failure; 4.Silence/reset button for alarms ***** timer to record therapy time 6.Humidity is adjustable continuously 7.>*7℃ temperature setting 8.A keypad lock prevent inadvertent changes the setting ***** for pulling and pushing , which is convenient to add water and wash ***** with low noise and long life-span ***** deviation and over temperature could be amended in front panel directly *2.A second thermal cut-off function for more safety *3.Skin temperature sensor failure protect function avoid over temperature ***** infant bed inclination angle is adjustable *5.six operating windows, two sides operating windows can be swiveled *6.Heater is electrically cut-out if air temperature inside incubator exceed *0℃ ***** with three drawers, silence castors *8.Large size and double wall hood ***** height adjustable suit for operation Technical data: 1.Power supply : AC **0/**0V *0/*0Hz 2.Power input : ≤**0VA Operating conditions: ***** temperature: *0℃~*0℃ ***** relative humidity: *0%~*5%RH ***** air velocity of flow: <0.3m/s 4.Air Temperature control rangeï&frac*4;š *5℃~*8℃ 5.Skin temperature control range:*2℃~*8.5℃ 6.Skin temperature sensor accuracy: *0.3℃ ***** fluctuation: *0.5℃ 8.Uniformity of mattress temperature: ≤0.8℃ 9.Warm-up time: ≤*5min ***** noise level: ≤*5dB *1.Humidity display range:*0%**5%RH