Description

BENEFITS Pre-packed easy to use water proofing coating. Ensures excellent water proofing characteristics. Excellent adhesion. Flexibility. Allows surfaces to breath. Economical and cost effective water proofing system. DESCRIPTION WATERGUARD A is pre-packed two component Powder and Liquid polymer, consist of processed cements and special fillers that can be applied over well prepared sound substrates to provide extremely tough durable waterproof render, **3 mm thick for water tanks, basements etc. (Where water under hydrostatic pressure exists, then WATERGUARD A must be used in conjunction with WATERGUARD T or WATERGUARD WM. USES All structures that are required to be waterproofed and protected against the ingress of moisture like Basements, Water tanks, Swimming Pools, Retaining Walls, Bridge Walls, Tunnels, Lift Shafts, Sewage Tanks, Reservoirs, Dams, Dock gates etc. MIXING WATERGUARD A should preferably be mixed mechanically by using an electric drill and paddle attachment. Pour the liquid polymer in the container first and add powder slowly while mixing continuously until an even homogeneous mix of brushing consistency is obtained. SURFACE PREPARATION All leaks and water jets must be stopped using WATERPLUG plugging compound. (Refer relevant Data Sheet). Substrate must be sound, clean and free from loose particles or laitance or contamination and preferably be wire brushed. Where cracks are present, cracks must be treated first depending on the type of crack.