Description

led traffic light controller Item:NBTLC**0 traffic light controller Power Voltage:*5~**5VAC Nominal Output Current Per Line:5A With PFC+PWM>0.8 Power Consumption:3W Loaded Power:≤1, **0V/output Ambient RH:*0%~*5% Product Size (mm):**0x**0x**0mm Packing size:**0***0***0mm G.W/N.W:5.6KG/4.9KG 1. Green Conflict Test Technique: when the green clash occurs, the signalized instantly changes to yellow flash status. It adopts current sampling, whenever the silicon controlled rectifier damaged (lightning strike) or the signal light broken, it can test. 2. Power Failure Protection: The parameters set in the controller is *0C~*4C transmittal technical CMOS chip, the data is credibility, when power cut the machine inside data of lasts for more than *0 years. 3. There are *0~*4 lines of signal output, and it can control *0~*4 different traffic lights. 4. Night off, yellow flash. Night off and yellow flash time can change. 5. It is equipped with the manual/automatic control modes. Press "Auto/Manual" button to enter the manual mode. The signal light maintains the current status and with each pressing of the Manual button, the signal light changes the current procedure. In the normal operation mode, the controller displays the current time. In case of deviation from the standard time, it can be corrected. Yellow light transit time: can be set between ****5 seconds. Left turn lane passing time: can be set between ****5 seconds. Straight lane passing time: can be set between ****0 ***** turn lane passing time: can be set between ****5 seconds. 6. Online set feature: In the course of the setting, the controller operates normally and the confusion will not occur at the crossing. 7. Output is Real zero cross trigger protection and high-power silicon controlled rectifier, improve the security. Even output short, it cannot damage the silicon controlled rectifier. 8. Panel display simulating the lanes and the pavements at the crossing.