condenser

Description

unit cooler (with two fan motors) widely used in refrigeration industry High quality, Reasonable price. unit cooler (with two fan motors) 1. material :copper , aluminum , galvanized plate 2. aluminum foil: hydrophilic or bare 3. fin type: louver fin or flat fin and slit or corrugated fin 4. copper pipe: diameter 7mm or 9.*2mm or *0mm above , inner screw thread or smooth tube 5. pitch of fins can be adjusted between 1.8—5.8mm. 6. pitch of holes and pitch of rows : *5**1.*5MM and *2.7**9.*5MM 7. suitable for R**4A, R*2, R**4A, R**7C refrigerant and so on 8. voltage: **0V/1/*0HZ and **0V/3/*0HZ or other type. 9. different alternative condensing fans available: shaded pole or outer rotor fan motor. *0.did gas examination under 3.0Mpa air pressure to ensure the tightness. ***** type: side-exhausted with single fan, double fan, triple fan and fourfold fan, heat exchange surface is from 2 square meter to **0 square meter top-exhausted with double fan and triple fan, heat exchange surface is from *0 square meter to **0square meter. *2.widely used in refrigeration industry, cold room and other cooling system. *3. we can supply products as per customized samples or drawing. *4.producing procedure: tube bending, punching fin, expanding, digressing, drying Welding, leakage test, bending, inspection, packing Note: for further information please contact us