Rapid Reparing Mortar (H03)

Description

Uses H*3 RAPID REPARING MORTAR is applied on rapidly repairing and reinforcement on airport raceway, viaduct, industrial plant and feed units, bridge interface. Feature: 1. One component; Can use directly after mix with appropriate water. 2. Compressive strength fast; *0MPA in 2 hours. 3. Compensation contract, without the phenomenon of shrinkage cracks. 4. High durability, can be used in traffic areas. 5. Single contruction up to **0mm. 6. Non chloride, non toxic, no odor, solvent free, non flammable, environmental. Surface Preparation All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compounds and any other loose or contaminating materials. Exposed steel must be clean to ensure no rust attached to the surface. Pre-wet surface before construction and ensure no clear water. Stir and Mix Add *5kg powder of F*5 into 3.**4L water. Stir the mix it for **5 minutes with electrical drill-mixer until a lump-free consistency is achieved. Application The thickness of each layer is **0mm. If need thick layer construction, can continuously construction with a maximum of **0mm thickness of each layer. Remark: Package: *5kg/bag Color: Grey/ white Color Grey Ingredient Silicate cement, inert aggregate, graded sand and other chemical additives Maximum diameter 4.5mm Ratio( powder: water) *5KG: 3.8L Operation time ****5min Thickness ****0mm Coverage 1.*8kg/m2/mm