Grout King (Tile Grout/ Tile adhesive)

Description

Grout King (Tile Grout/ Tile adhesive) Use T*3 grout king applies on joint filling between all kinds of boards (ELD, plywood) and wall. T*3 grout king is compound polymer latex which has excellent adhesion and elasticity. You can use it directly when open cap without stirring the latex. Features 1. Easy application up to a joint width of *0mm 2. Does not shrink or crack 3. Resistant to outdoor weather conditions 4. Full color and easy cleaning 5. Mould resistant and water repellent 6. Convenience for using 7. Non-Toxic Surface preparation 1. The solid substrate should be clean, dry and free of oils, grease, wax, latex compounds, curing compounds, dust and all foreign matter. 2. Before commencing grouting, ensure the tile adhesive has set firmly. It usually requires *2 hours for solidifying the tile adhesive. 3. Remove any spacer lugs, rake-out any excess adhesive and any loose or other material from the grout joints. In general, ensure the grout joints are clean and dry. Application Directly use it after opening; Do not need to stir when use it Precautions 1. Don&#**9;t apply T*3 grout king in temperature above *0 degree or below 5 degree. 2. Cleaning or discoloration problems can be occur with either texture, porous or natural stone tiles. 3. Don&#**9;t apply strong acids on G*0 grout king. Coverage: Formula (mm): 1.8*(tile length+tile width)*gap width*gap depth /(tile length*tile width) Remark Main ingredient: Concrete polymer Package: *5kg/bag Storage: Shelf life is minimum 1 year when stored in covered and dry environment.