Description

Specification 1).Product name: LED Daytime Running Light 2).Model: HOMA-H**5 3).Certificate Name: DRW Emark*4 4).Certificate No.: E4 **7R ******1 5).Whole kits Consist: Two LED lamps (Left one and right one), wiring, one paper gift box, and user manual 6). Lamp Consist: Electronic circuit board, viewfinder, wiring, lamp hull and housing; 7). Electronic circuit board: 5 high-power LEDs and Controlling gear Major Technology Parameters 1). Rated Working voltage: DC *2V 2). Rated Working current: DC 1.*2A 3). Rated Power consumption: *3.*4W 4). Limb darkening current: DC 0.*6A 5). Limb darkening Power consumption: 7.*2W Maximum Technology Parameters 1). Maximum working voltage: DC *4V, 1 minute only; 2).Over working voltage: DC *8V, 1 hour only; 3).Continuously working time ≥*4hours: maximum current range≤±2mA 4).Maximum surface temperature:≤*0℃ï&frac*4;ˆExtra ventricular temperature:*0℃ï&frac*4;‰ LED bulb technology parameters 1).Bulb Color temperature range: 6, **0K*6, **0K 2).Power: 1Wï&frac*4;ˆeach LED bulbï&frac*4;‰ 3).Rated working current: ≤**0 mA 4).Current stablilty≤±2 mA (in *4 hours) 5).Brightness is between *0 to *0 LM Electronic Protection 1). High-Voltage Protection The control system will stop working automatically to protect the control module from damage when the power voltage is higher than *5.5V, then LED light only works by the outer power directly; 2). Low-Voltage Protection The LED light will shut off to protect the system once the voltage is lower than 9v; 3). Lose-Frequency Protection The LED light shut off once the control frequency is abnormal to protect the control module and LED light. 4).Wrong-Connection Protection It is no harmful to circuit when the three cables of LED were connected incorrectly. The LED light is off when connection is wrong; it will be on when connection is right. The three cables of LED light are VBB, Vss and VC respectively. Other characters 1). Anti-Vibration The Anti-vibration character of the LED DRL is accord with the requirements of the automotive relevant technical specifications. 2). Waterproof and corrosion-resistance The waterproof and corrosion-resistance of the LED DRL is accord with the requirements of the automotive relevant technical specifications. 3). Appearance The appearance of the LED DRL hasn’t obvious depression, rip and deformation. And it has clean and smooth surface without burr, light scratches, dirt, bubble, such as no more than 3 pcs. There are not obvious cumulate glue imprints and white granules inside the light housing and viewfinder. 4).Packing The whole kits should include left LED light and right LED light, one cable assembly, two metal hasps for installing. All parts are placed into three inside small boxes with a manual installation.