5050 LED STRIP(waterproof)

Description

 Features:
1. Adopt SMD ***0 series LED(3 chips in one LED)
2. Adopt Flexible circuit board, can be bended freely
3. High brightness, **0 degree beam ang
4. Available in full range of color including single color and RGB color
5. Cut able every 3 LEDs
6. Solid-state light source, high shock/vibration resistant
7. Input voltage is *2V DC
8. Maintenance free, easy installation

Other:
***0mm**0mm SMD Light Ribbon(*0PCS LED)
Working Voltage: DC*2 V
Working Current: ******0mA
LED View Angle: **0 DEG
Grade of Waterproof IP*5
Instructions

Wiring explains:
Red, yellow, blue, green, white monochromatic waterproof soft light bar: Product drawn two cables, a root is red, a root is black, wire line diameter is *2AWG, length is **0MM. Red line to connect power are level, the black line anode connect power. If using controllers pick controller, red line output is level, black after the controller outputs anode

Product labeled 3M two-side glue on the back. Product installation only tear two-side glue the above protective paper, posted on need the installation position can.

Three, installation note:
1. According to the wiring diagram right wiring.
2. Pay attention to the products work parameters are not exceeded specified limit parameter list.
3. Product installation surface must level off, clean. Otherwise, the product will fall off.
4. Product installation bending place should avoid just on LED or other components position, lest damage easily products, affect the service life of the product.
5. Product in installation and use process please note anti-static, are not allowed to touch products with sharp.