Description

Product: Drying and Dehumidifying System Product category: Material Processing System Product introduction: Drying and dehumidifying system The KRD dryer is a modification of the well-known KRD Bulk mixer, where homogeneous mixing is achieved in a few seconds. The mechanical fluidization ensures that all particles are surrounded by drying medium (cold/warm/hot air, inert gas etc.) and an effective transmission of energy occurs. Moisture is thereby extracted from the product. Drying materials: powders, bulk Materials, filter cakes, Granules and liquids The KRD drying technology is built on the well-known components and principles, which ensure a well arranged and reliable process. It consists of a modified KRD mixer, a heater (electric, steam or combustion), a cooler (for condensation and cooling of air), a heat exchanger, a centrifugal fan and a *-step filter system. The primary filter for continuous cleaning , and the secondary filter for collection of fine particles. Heat pump can also be offered to increase the total thermal efficiency. The KRD Bulk Drying system has been especially developed to dry products very gently and to achieve the best possible drying economy. Heated air is blown into the mixer and mixed with moist product. During this heat exchange, the moisture will evaporate from the product. Moist air passes through the filter before it is drawn into the fan. The air is thereafter blown through the cooler for condensation before it is reheated. When drying very moist products, the wet product is mixed with dry products first to ensure that the fluidization and the high drying rate are maintained. Today KRD offers the drying system as a closed or open system. The system usually operates with a batch dryer, producing multiple batches. For special applications the dryer can operate continuously where product is separated from the exhaust air in a cyclone or a filter system.