The
performance of our this type of hydraulic press brake( metal sheet
bending machine): Model:
serialWC*7Y-
1. The frame is steel-welded construction, vibrating to eliminate
stress, with high strength and good rigidity.
2. Forcing-torsion shaft maintains the synchronization of both
cylinders with high precision.
3. Mechanic stop nuts ensure stable and reliable positioning
accuracy.
4. The ram is driven by hydraulic system with two cylinders.
Working pressure could be adjusted stepless and the noise of
machine is lower.
5. The stroke of ram and back gauge could by adjusted through
motor; Also it could be adjusted by hand wheel for fine position.
The value adjusted could be displayed on numerator.
6. Main sliding parts such as cylinders, piston rod, guide way, are
all treated with wear-resistance.
7. There are slanting wedges (compensation units) installed on the
top of tools. They could be adjusted by hand to meet the accuracy
requirements of work piece.
8. Deflection compensation unit is adopted under worktable for the
machine above **0Tons.
9. Full machine is guarded with safety guard with interlocker to
prevent the operator from injured. OPTIONAL: 1
two-hand control foot pedestal device 2.it is
possible for special tooling with different lengths to bend the
closed frame workpiece 3.any
tailor-made are available on request.
