Multifunctional dog cat aniimals repeller

Description

Multifunction Repeller(AN-B**0) The device can emit ultrasonic, strong flash, high-decibel sound waves to drive away animals (such as cats, dogs, birds, mice, etc.) via function adjust button A according to different environmental needs. Applicability: Multifunction Repeller : suitable for Garden, yard, home and apartments, food service , farms and so on. Technical data: 1.Power Supply: *-volt battery stacked or a mains powered 9V adaptor 2.Passive infrared area: *0 square meter 3.Passive infrared area: **0 degree ***** range:****6KHZ 4.Audio frequency:app 7KHZ ***** sound pressure : **0 dB Specifications : Multifunction Repeller has two work patterns for your choice, one pattern is auto-work , the other pattern is passive infrared trigger work. Mode one with yellow LED:Ultrasound+Alarm+Flashing Mode two with green LED:Ultrasound+Flashing Mode three with red LED:Ultrasound Mode four with the flashed red LED: Long time ultrasound without passive infrared Method: 1.Put on the battery or plug unit into socket, the head of 8 LED light will flash and indicate the power has been connected, 2 second later the device prepare for work. Long press the button A( refer to photo ) the yellow LED auto turn on and enter into the first working mode, after about *0 seconds into the alert mode, When the passive infrared probe to the target, trigger the first mode work(ultrasonic+alarm+falishing), work continued *0 seconds enter into the alert mode again. 2.You are choose different working mode according to different using environment, after the power turn on and long press the button A, press the button A to choose the working mode (yellow LED, green LED, red LED and flashing the red LED) 3. The conversion time of first three modes, need *0 seconds enter into the alert mode and the first three modes are all woking by the passive infrared. working cycle is about *0 seconds, 4.Long press the button A, turn off the p