Description

Air-conditioning and heating systems represents the highest power consumption equipment of any residential and commercial buildings or factories. Improperly maintained systems increase power consumption. Air-con running at too low a temperature or a heating system overheating also increases consumption. Breakdown of HVAC equipment causes temperature to rise or drop to uncomfortable level. Close monitoring of problem area can reduce the cost of repairs and lower electricity usage. WT ***1 GSM remote monitoring and control system will instantaneously report failure of HVAC component to maintenance team so that immediate action can be taken to correct faults. Adding I/O modules keep track of running hours of equipments like AHU, fan coils, compressors so that preventive maintenance can be applied. Temperatures at different parts of a building can be monitored to prevent offices or areas to be overcooling or overheating. WT ***1 SMS alert system can be installed at key installation and in unmanned locations to monitor equipment condition, too low Air condition temperature, overheating and any breakdown of HVAC. Technical crews are immediately notified via SMS with clear description of fault and location of such failures. They can also log into WT ***1 from a remote location to view the details of the problem so that they can respond with the right tools and parts. WT ***1 is flexible enough to direct different types to the correct people. WT ***1 SMS alert devices suitable for all the above monitoring needs. It is a device which able to sends information/ status of a system to *0 users. (to mobile phone/software/server/capital) by SMS if any emergency happen. The engineer also cans SMS from his mobile phone to turn on/off or reset the ELCB/MCB and On/OFF lightning, air conditioner. WT***1 SMS alarm design and provide complete solution including hardware and software communication platforms, user friendly interface and a variety of special sensors.