Sell NPK Fertilizer Production Machine Line

Description

1. Disc Mixer It is mainly used to mix raw material. The polypropylene-lined plate or stainless steel plate makes it no material-sticking and stands wear and tear. With cycloidal pinwheel reducer, it has the advantages of compact, easy to operate, stirring evenly, easy to discharge, etc. 2. Horizontal Crushing M/C with two spindles (shaft) It is mainly used to crash raw material in compound fertilizer production. Chains of special materials are used to increase wear resistance, prolong the service life, reduce the times of replacement and improve the efficiency of production. It is very easy to operate. 3. Self-cleaning Crusher On the base of general standing miller, it avoids the problem of materials’ sticking to the wall. So that it can produce continuously. Available for returning material. Specifications/ mm Power/ kw Rev /r/min Output capacity / t/h FQ**0 7.5 ***0 **4 FQ**0 *8.5 ***0 **6 FQ**0 *0 ***0 ***0 4. Disc Granulator It is one of common equipments in compound fertilizer industry. Generally, it is applicable to smaller scale fertilizer production of medium and low concentration. The slope degree of its disc can be adjusted from *0° to *5°. The disc revolves at a certain angle with the horizontal plane driven by the motor through reducer. The powder will rise along with the revolving disc under the friction between the powder and the disc; on the other hand, the powder will fall down under the function of gravity. At the same time, the powder is pushed to the disc edge because of the centrifugal force. The powder materials roll in a certain trace under the function of these three forces. It gradually becomes the required size, then overflow by the disc edge. It has the advantages of high granulating rate, homogeneous grain, high strength, easy to operate, convenient to maintain, etc.