General Specifications for
playground
� 1.
Post?
� 1.1 Material? Dia.**4 mm & wall thickness 2.2
mm steel posts, with hot-rolled steel.adopts process of cutting, bending ,welding,
shot blasting, oil removingandphosphate?
� 1.2 Surface treatment: After shot blasting, oil
removingandphosphate, adopt Zinc powder (Interpon PZ**0)
& AKZO Nobel-Great Wall powder, which is environment-friendly
& outdoor use, produced by **0 Top company AKZO Nobel, After
solidified byhigh temperature, the surface is smooth and
slippery,UV resistant,
colorful, and difficult to break down.
Theelectro-static powder coating Machine is imported from America and be a part of automatic
production line. We adopt the imported whirly filter, which lead to
no pollution but high efficiency to recycle the
powder,.
� 1.3
Installation requirement The
stick should be installed in the concrete ground over *0cm
thickness and at least *0 days later if the concrete ground is
newly layout. If the ground is sands, turf, soil, required
underground installation. And the length underground should be
**0mm to **0mm per actual playground
� 2. Metal Parts (Steel
Climber, Steel panel, Ladder, Handrail..)
� 2.1 Material? Adopt Dia.*5/*2/*8/*8/*0mm &
wall thickness 2.5mm?(The quality of
steel meets with the requirement of GB / T *******8).The welding
adoptsCO2 shielded arc welding (It meets with the
requirement ofBS********5, and the technology meets the
requirement of the BS********5).
� 2.2
Surface treatment: After cutting, bending ,welding,
shot blasting, oil removingandphosphate, then the cover is painted
by Zinc powder (Interpon PZ**0) & AKZO Nobel-Great Wall powder,
which is produced by one of **0 Top company AKZO Nobel, After
solidified byhigh temperature, the surface is smooth and
slippery,UV resistant,
colorful, and difficult to break down.
Theelectro-static powder coating Machine is imported from America and under operation of
computers. we adopt the imported whirly filter, which lead to no
pollution but high efficiency to recycle the powder,
.
� 3. Deck 3.1 Material: Adopt cold rolled steel sheet, in
thickness 2mm, with punched hole and reinforcement Rib.
� 3.2. Surface treatment After shot blasting, oil
removingandphosphate,use Envelopment-friendly extra tough vinyl as
rubber coated material to build up a protect layer on Deck, enhance
the safety reliability and improve appearance.
� 4. Plastic Parts (Slide, Roof, Panel) 4.1 Material: LLDPE which imported from Korea and
reach edible level, top safety.
� 4.2 Production method The plastic slide and roof are made
of imported LLDPE, shaped by Rotational molding. It is strictly
conformity with GB/T ********6. The thickness of plastic is more
than 8mm, colorful, UV resistant, anti-static and difficult to
discolor. Also it is safe and environment-friendly.
� 4.3 Plastics connectors The fastener are shaped with
aluminum alloy (It meets the requirement of GB/T *******4), the
stainless steel fixing accessories enhance the security. The screws
are stainless steel **6#, which conform to the GB/T********2
standard.
5.Rope and Crawl
Net The rope
adopts marine navigation cable, with the diameter of *6mm, and the
core is chrome-plated steel wire with jacket hose. We adopt Zinc
alloy connectors &elliptic accessories, which are
created and exclusive used by our company.��
� 6. Wooden Parts:
� 6.1Material: Adopt Finland as the wooden
material, which is imported from Finland and is famous for high
intensity. The wood is glossy,cross-grained
butwell-proportioned
and excellentanti-corrosive
ability.
� 6.2
Surface treatment After
the pressing and planning?the wooden posts and
then be taken into the anti-corrosion treatment, fireproofing and
polishing. For the surface powder coating, we use �ZHIJIN�
branded color powder, which conforms to
theHG/T********1&GB/T
******8 standard. The dimension of the square wooden deck is:
**0**5mm.
� 7.Stick Cap
� 7.1 Material Adopt high density and strong
Alum./Steel alloy.
� 7.2 Surface treatment After shot blasting, oil
removingandphosphate, adopt Zinc powder (Interpon PZ**0)
& AKZO Nobel-Great Wall powder, which is environment-friendly
& outdoor use, produced by **0 Top company AKZO Nobel, After
solidified byhigh temperature, the surface is smooth and
slippery,UV resistant,
colorful, and difficult to break
down.
� 7.3 Cap
accessories Adopt high density **6# stainless
fasteners, which is safety and durability.
8. Clamp &
Accessories
� 8.1 Clamp Adopt high density and strong
Alum./Steel alloy.
� 8.2 Surface treatment After shot blasting, oil
removingandphosphate, adopt Zinc powder (Interpon PZ**0)
& AKZO Nobel-Great Wall powder, which is environment-friendly
& outdoor use, produced by **0 Top company AKZO Nobel, After
solidified byhigh temperature, the surface is smooth and
slippery,UV resistant,
colorful, and difficult to break
down. the surface is vivid, smooth & slippery.
� 8.3 Accessories Adopt stainless steel **6# concealed
fixing bolts and Nuts. The rubber tile are used for the connecting
point between stick and clamp.
� . Production under ISO ***1 &
TUV quality management control.�
