Description
This is a type of screeding general road marking machine, compact
and small, flexible to operate. Under the premise of sufficient
melted material, it also has relatively high construction
efficiency. The type I is for flat line, and the type II is for
flat line and convex line.
1. Engine: Japanese Honda *0HP air-cooled electrical starting
single-cylinder gasoline engine. The fuel tank’s Capacity is
*0L.
2. Driving system: Imported oil pressurized continuously variable
speed transmission system (HTS) with automatic brake device that
can freely go ahead, back off and stop. The left and right back
wheels are equipped with differential speed gearing to ensure it to
drive freely around the curve and change directions timely. Driving
speed: ***2km/h, maximum climbing capacity: *5°.
3. Heating mode: Propane infrared heating source, saving the gas
*0% than the traditional heating way. The heating is more evener,
more convenient, safer and more environment-friendly.
4. Marking mode: Equipped with hydraulic screeding marking shoe;
structure board is made of imported special steel sheet with
high-temperature resistance (***0°C), oxidation resistance and
deformation resistance. It has much better stability after
stamping. The plinth is the pneumatic screeding structure that is
made of special alloy steel. Floor knife that contacts with the
ground directly adopts imported hard tungsten steel knife-head. The
precision technique ensures its better sensibility, abrasion proof
and firmness. The marking has more regular raised shape, evener and
straight bottom line edge, and perfect head. The standard
configuration of the marking shoe is **0mm. (Option for other sizes
according to the needs of customers).
5. Glass bead spraying system: *5L single pressure type glass bead
tanks with visible window. Equipped with single glass beads
spraying gun on the left or right side, whose pressure, flow and
spraying width can be adjusted to ensure spraying glass beads much
firmer, much evener and more economical.
6. Electronic control: Set up various standard linetype control
mode to realize micro-electronic intelligent control; it can be
freely adjusted according to the customer’s personalized needs.
7. Paint tank: Cool-rolled oxidation-resisting steel paint tank, in
whose interlayer the high-tech thermal insulation material is
filled. Inside the tank is equipped with the hydraulic chain-driven
horizontal vane blender. Paint Capacity:**0L.
8. Air compressor: 0.6 m3/min piston type air compressor. Air
storage tank with adjustable pressure is equipped with automatic
safety exhaust device.
9. Warning function: Single warning lamp whose flicker frequency
(or burst flash) can be adjusted freely, it improves the safety of
marking operation.
*0. Guide rod: Guide rod can be freely adjusted up, down, left and
right.
*1. Pre-mark system: It can be fitted with pre-marking system. When
you marking the one line you can pre-mark another line, this
improves the working efficiency greatly.
*2. Size & Weight: ***0mm (L) ×***0mm (W) ×***0mm (H).
**0kg.
Option for a pre-heater trailer according to the needs of
the users to make the long transportation and paint melting
convenient
