1. Engine: Japanese Honda *3HP four-stroke air-cooled gasoline
engine.
2. Paint Pump: Equipped with single (type I) or double (type II)
vertical external plunger pump with good abrasion resistance and
easy maintenance. The maximum flow is *0L/min and the maximum
pressure is *0mpa (working pressure: ***2mpa). It can mark
single-color or double-colored lines with single gun or double guns
at the same time. The type II can simultaneously operate three or
four guns to mark single-color or double-colored lines.
3. Structure: Integrated high strength welded structure. The engine
drives the hydraulic pump to run, and then drives the cylinder to
work through the hydraulic control system. The whole system is easy
to operate. The control device within reach can be set precisely at
any time during the marking operation.
4. Spray width: ******0mm (maximum width can be extended to ***0mm
according to the users
