Description
Machine Features:
1. The two spindles could be used alternatively and automatically
and could be placed with two different blades to work one by one.
This ensures the machine work more efficiently.
2. Imported *5mm linear rails, four lines of ball bearings in the
sliders to enhance the bearing capacity and the working accuracy
and the life of the machine.
3. The lathe is welded by thickened steel to avoid distortion.
4. Original Taiwan imported leading screws, high accuracy in
working.
5. Taiwan syntec control system has good compatibility and is
compatible with Type3, Artcam, Castmate, Artcut and many other
design softwares. It can control the 3D-processing which process,
engrave and cut quickly and smoothly.
6. Vacuum table which is made of bakelite plate(optional) has good
absorption, which can strongly absorb different areas' material,
high density, and not distorted.
7. Adopt Japanese servo drive system with large power. Y axis uses
double-motor drive. The running speed can reach to *0m/min above
while travelling.
8. Taiwan Delta frequency transformer, Simens electrical
components, high performance, and perfect in anti-interference.
| Control System |
Taiwan Syntec Control System |
| Work mode |
Ac servo, pinion and rack transmission /stepper for choice |
| Rail |
Taiwan imported square rail |
| Resolution ratio |
|
