FOB Price
Get Latest Price|
Minimum Order
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Malaysia
連絡先担当者 Mr. Baskar
21 JLN KETAPANG 18,TAMAN RINTING, MASAI, JOHOR
In these Drum Pumps, a pump tube is connected to motor by means of self aligning coupling. The motor transmits power through coupling to the drive shaft of pump which is well supported by TEFLON Bearing. The impeller is mounted at the foot piece of the pump tube and is always immersed in the liquid which assures self priming.
The Drum Pump empties the drum to residue of 1 Liter Self Priming and also self draining on completion. No welding is involved in any part of pump tubes. Complete strip down is possible with least number of tools.
Drum Pump with Electric Motor
Fully enclosed, fan cooled motors with ON/OFF switch, Single phase AC or DC, Intermittent duty related with *5 feet long industrial cord and plug
Drum Pump with Pneumatic or Air Motor
Variable speed drive with in built control valve. Suitable for safe operation in flammable environments. Automatically cools down due to expansion of compressed air. Air requirement is *8cfm at *- 6 bar. Air inlet size ¼".
As sparking or fusing is not possible, Air Motor offers explosion protection without any additional cost.Drum pumps for High Viscous Liquids:
This type of Drum Pumps are designed as progressing Cavity Type Screw Pumps for pumping medium to high viscous liquids. The progressing cavity design ensures smooth and non pulsating flow and ideal for the gentle transfer of liquids.
Pumping action starts the moment the Rotor turns. Liquid enters the pump suction under pressure as the Rotor turns within the Stator, thus forming tightly sealed cavities which moves the liquid towards the outlet .Moreover the liquid acts as a lubricant between Rotor and Stator.
Features:Available in SS**6 / **4 material.
Maximum flow rate of *0kg/min with a discharge pressure up to 8bar.
Can generate differential head up to *0meters for low viscous liquids.
The flow rate is approximately proportional to the speed.
However, pumping pressure does not depend upon the speed.
Rotor is made of SS**6.
Stator is made of metal tube with internally molded synthetic rubber or Viton or Butyl or Neoprene or EPDM or Nitrile or Teflon
Applications:Suitable for highly viscous liquids such as Molasses, Syrups, Liquid Chocolate, Honey, Glycerin, Liquid Soap, Plastic Solutions, Resins, Glues, Shampoos, Grease, Wax etc.,
In a nutshell it is a very simple pump as a First World Product at Third World Price