Description
1, can be used on the wet
surface of the basic construction
2, strong bond with the
substrate, the active ingredient in the slurry can penetrate the
pores and micro-cracks in the cement-based surface, and produce a
chemical reaction with the substrate to form a fine crystal
integrated waterproof layer
3, can follow up directly after
the slurry dry and with no mortar protective layer
4, can be the waterproof both
for the positive and back sides.
5, non-toxic, harmless, and
environmental-friendly product
6, good ventilation and keep the
surface dry
7, made from inorganic material,
good aging resistance and environmental-friendly
product
Application:
1, the waterproof and moisture
proof for indoor and outdoor wall
2, factory buildings, floors,
kitchens, ground car parks, and other stable constructive
architectures of waterproof projects
Surface Treatment:
1, the surface should be stable,
clean, smooth, no dust, no oil, no shedding, and other detrital
materials
2, the obvious pore and hole
must be silted up by the cement mortar, the sharp edges should be
wiped out
3, moist the surface with clean
water till there is no clear water before operation
Operation Process:
1, pouring the additives into
the container, and then slowly pour the powder and stir them into a
uniform powder-free and with no deposit paste
2, during the operation, keep
intermittent stir to avoid precipitation
3, mixed ratio:
