Description
Feature:
(1) solidifying rapidly within
**5 minutes, (2) suitable for small parts and structural strength
(3) can be used after two hours (4) quick set and high adhesive
performance (5) waterproof and chemical medium (6) can be lacquered
and waxed
Main Component: A component is the modified
Epoxy Resin and mucus, B component is modified amine solidify and
mucus. Name Of Product Item Code Component
Rate（A:B=1:1）
Appearance Solidifying Speed (*5℃mix glue ***2g）
Shear Strength (*5℃X*8h, Steel-Steel) 5 Minutes Rapid Carbon
Black Epoxy Adhesive SK****2 A：B=1：1 Component A
is white mucus and B is black mucus **5 Mins
≥*0MPa
Scope Of Application: The products of this
series are widely used for bonding all kinds of hard material, like
iron, casting iron, steel, aluminum, glass, pottery, graphite,
concrete, cement etc. And they could be applied to bond and repair
in the field of daily households, home appliance, artworks
etc.
Using Method: The surface should
be clean and dry, without oil or wax Take down the cap,
pierce the seal, squeeze out evenly (A:B=1:1). cover the surface
with glue based on the mixing of the two components evenly,
Press it according to the actual condition.. it could achieve the
using intensity after the solidifying for two hours during the
normal temperature, it is suggested to operate at above
5℃.
Warning: It must be even for the
mixing of the two components during the adjusting of the glue.
Quantity should not excess too much. Tighten the caps after usage
.Do not mix the cap of part A and B. Wash the additional glue on
the hands or the surfaces of bonding materials by alcohol before
its solidifying. Avoid touching with the eyes and skin
directly. If getting touch with the skin, please wash them at
once by using of a cloth with dipping of alcohol before
solidifying, then, clean them by soap and warm water. If getting
touch with the eyes, please wash them immediately with plenty of
water, and see the doctor for serious situation. Take strict
precautions against touching by the kids and entering into the
mouth.
Storage And Packing: 1. Stock the products
with air-tight seal in the environment of shade and dry. The
shelf life is one year. It is available to use based on
passing of the test if being beyond the shelf
life.
2. Preserve and transport as non dangerous products.
3. Packing specification: *6g/card, in tube.
