Description
XPS (Extruded polystyrene foam) flame
retardants
Product Name: XPS extruded plate flame retardants
Grade: FRP-JS****1
Appearance: Red segment-like particles
Carrier Resin: PS
Effective content: ≥ *0%
Apply resin: XPS extruded plate
Applicable process: melt extrusion, flame retardant
Decomposition temperature: ≥ **0 ℃
Features:
XPS ***1 flame retardant is a flame retardant decomposition
temperature is very high, and its decomposition temperature than
**0 degrees Celsius, the process has a very good thermal stability,
the device will not cause severe corrosion of screws and other
parts to extend the equipment out cycle.
As above, the flame of the XPS has a good recycling properties
of recycled through heat leftover after processing through the XPS
after granulation can still use the XPS as a flame retardant, which
is eco-environmental protection and use of resources is very
beneficial of, and indirect cost savings in the customer's raw
materials.
XPS extruded plate ***1 has a good flame retardant efficiency,
less the amount of flame retardants can be added to obtain the
flame retardant B1 (reference to China's GB********7, equivalent to
the EU flame retardant insulation material of the highest level of
) grade flame retardant, The XPS has a relatively small flame of
bulk density, and save the cost of flame retardants.
XPS extruded plate ***1 also has a broad spectrum flame
retardant properties, it is not only suitable for GPS-retardant
resin material to add, but also for scrap, recycled PS, etc. also
have good flame retardant, flame retardant domain in broad terms,
the appropriate time in the production of XPS add some scrap or
secondary recovery of the PS is conducive to recycling of
resources, the white foam to reduce waste pollution, and reduce
production costs.
XPS ***1 also has a good flame retardant processability, the
first of its flame retardant masterbatch for the particle shape,
with a mixture of PS particles is more convenient, does not produce
powder particles mixed with the precipitation caused by the
phenomenon. Does not affect the the machine feed rate, and the
current relatively stable production process, production of XPS
smooth, uniform, dense foam.
The appearance of red flame, using a special coating of red
phosphorus flame retardant co-processed, so the production XPS does
not require color, the appearance of red, similar to the color of
Owens Corning extruded board, but not completely the same.
Compared to the traditional use of flame retardants, such as
the XPS HBCD, ***1 revolutionary increase heat resistance, the
production will not release a lot of HBr to avoid equipment
corrosion; flame retardant efficiency did not decline, even
increased, amount or less; flame-retardant effect of
broad-spectrum, appropriate to add the PS or fully recycled as raw
material production XPS, ***1 can also get a good flame retardant;
and ***1 as better heat resistance, processing flow is better and
good compatibility with PS resin flame-retardant so the XPS
production efficiency is very high, do not reduce capacity, using
very simple, do not deliberately lowered the temperature of
processing equipment.
In short, the use of ***1XPS flame retardant can easily
complete the production of XPS, XPS and flame retardant grades
based on the amount of added flame retardants is very easy, ***1XPS
extruded board is a new flame retardant extruded board, can easily
replace the traditional decomposition of flame retardants.
Packing: *5Kg, PP plastic woven bags with PE inner bag
Transport storage: a general non-hazardous chemical transport,
dry, cool place for storage.
Shelf life: product is air-inert material, to avoid long-term
storage of ultraviolet light
