Description
Jaw Crusher
Application：
Jaw
crusher is widely used in mining ,smelling,building
material,highway,railway,water conservancy ,chemical industry and
many other departments,for this machine,the suitable crushed
material are pyrite,limestone,basalt,phosphate,heavy crystal
stone,calcium carbide,coke,etc.
Jaw
CrusherFeatures:
This jaw crusher is composed of machine frame,eccentric shaft,large
belt pulley,flywheel,movable jaw ,side guard,toggle platetgoggle
plate backseat,adjust gap screw,return spring,fixed jaw plate and
movable plate,among them,the toggle plate still play a role as
insurance.This series have:high crushing ratio,even
granularity,simple structure,reliable operation,easy
maintenance,low operating cost.
1.Crushing chamber is
deep and no dead zone,improving feeding ability and capacity
2.Crushing ratio is high,finished product is regular
3.Pack discharge
mouth adjustment device is reliable and convenient,and its
adjustment range is large ,increasing the equipment
flexibility.
4.Lubrication system is safe and reliable,easy to replace the spare
parts,simple mainteneance
5.Simple structure,reliable operation,low operating cost.
6.The equipemtn is saving energy:single machine can save energy by
****0%,and the system can save above one time.
7.The discharge mouth
adjustment range is large,which can meet differnent customers
need.
8.Low noise,small
dust.
Jaw Crusher
Operating principle:
The motor drives the belt wheel, and makes movable jaw up and down
by eccentric shaft. When the movable jaw rises, the angle between
the fixed jaw and movable jaw gets larger, and the materials can be
crushed to reach the crushing target. When the movable jaw is down,
the angle between the fixed jaw and movable jaw becomes smaller.
The movable jaw plate leaves the fixed jaw plate under the function
of drawbar and spring, and then the crushed materials are
discharged from the lower outlet of the crushing cavity.
Jaw crusher
specification:
|
Model
|
Feeding size
（mm）
|
Max feeding size
（mm）
|
Capacity
（t/h）
|
Motor Power
（kw）
|
Dischage mouth adjustment
range
（mm）
|
Overal dimensions
（mm）
|
Weight
（t）
|
|
PE**0×**0
|
*0×**0
|
*5
|
0.***0.4
|
1.5
|
***0
|
**5×**0×**0
|
0.**6
|
|
PE***0×**0
|
**0×**0
|
**5
|
**5
|
5.5
|
****0
|
**5×**8×**0
|
0.*1
|
|
PE***0×**0
|
**0×**0
|
**0
|
***0
|
*5
|
****0
|
***0×***5×***6
|
2.8
|
|
PE***0×**0
|
**0×**0
|
**0
|
****5
|
*0
|
*****0
|
***5×***2×***6
|
6.5
|
|
PE***0×**0
|
**0×**0
|
**5
|
*****0
|
*5
|
