Description
Double roller
crusher application:
This machine is a glossy roller crusher,which is
applied for laboratory to crush mineral stone or rocks with medium
and low hardness ,and their compressive strength shoould be less
than**0kg/cm³
Double roller
crusher characteristics:
This machine is mainly composed of engine base,press
roller and safe spring.When working,the two press rollers will
swing back in an opposite direction through V-belt,gear to crush
material.The gap between the press rollers can be adjusted so as to
controll the output size.
Roller crusher
operating principle:
The main work parts are on the horizontal
axis,parallelly install two opposite rotation press roller.One
shaft is installed in the bearing to drive press roller,while the
other shaft installed in the adjustable bearing.You can adjust the
gap between two rollers to move the bearing seat by the tightening
bolts made of hand wheel and thread sleeve,when adjusting,should
loosen the nut.The bearing seat is installed on the machine body,at
one side of fixing press roller,there is spring installed.When
non-crushed material fall into the crushing chamber,spring is
over-compressed ,the gap between press rollers is
larger,non-crushed material can pass smoothly without damaging
other components to play a security role.The hopper is set on the
tope of the upper cover,in the inside wall with liner to prevent
the material from falling without press roller
crushing.
Double roller
crusher specification:
|
Model
|
XPZφ**0**5
|
XPZφ**0***5
|
XPZφ**0***0
|
|
Feeding
mouth size（mm）
|
*5**3
|
**5**3
|
**0**3
|
|
Feeding
size（mm）
|
≤*3
|
≤*3
|
≤*3
|
|
Output
size（mm）
|
0.**3
|
0.**3
|
0.**3
|
|
Vertical shaft rotation
speed（min/r）
|
**0
|
**0
|
**0
|
|
Capacity（kg/h）
|
**0
|
**0
|
**0
|
|
Motor
power（kw）
|
1.5
|
3
|
3
|
